A&D GX Series - Precision Balance

A&D GX Precision Balance, Trade Approved

From $1,924.00

GX Series - Trade

A high precision weighing balance featuring optimum weighing and settling time.

The GX features a standard RS232 data output, external calibration and multiple weighing units.

A percentage & counting mode is also available.

Trade Approved by NMI Australia.

More Information
Trade ApprovedNMI (Trade) Approved
  • New patented weighing mechanism Super Hybrid Sensor (SHS)
  • Trade Approved by NMI Australia
  • Five years warranty
  • Ultra Fast response speed - typically just one second
  • Standard RS232C serial data interface
  • Rugged aluminium alloy enclosure
  • 14 weighing units plus counting, percentage and user programmable
  • Wide range of capacities and resolutions
  • Built in under hook capability
  • Counting has A.C.A.I. feature for optimum results
  • Overload protected to take hard use
  • Last digit blanking via keypad if desired
  • GLP data output format to suit quality systems
  • Sealed keypad gives IP-54 protection level
  • Built in animal weighing software
  • Breeze break is standard with the GF-300
  • Supplied with free Windows Communication Tools (WinCT) software.

GX-GF Series Precision Balance

  GX-400 GX-600 GX-800 GX-1000 GX-4000 GX-6100 GX-8000
Weight capacity (g) 410 610 810 1100 4100 6100 8100
Division - Non Trade (g) *** 0.001 0.01 0.1
Environment Dry Environment
Stablizing Time (typical at Fast) Approx 1 sec Approx 1.5 sec Approx 1 sec
Repeatability (Standard Deviation) 0.001g 0.01g 0.1g
Linearity ±0.002g ±0.003g ±0.02g ±0.1g
Display Vacuum Fluorescent Display (VFD)
Display update 5 times/second or 10 times/second
Operating temp 5°C to 40°C, less than 85% RH (no condensation )
Power supply AC adapter
Calibration Motor-driven Internal Calibration (GX only)
Weighing pan size 128mm x 128mm 165mm x 165mm
Dimension 210(W) x 317(D) x 86(H)mm
Weight (approximately) Approx. 4.6kg Approx. 5.1kg
Standard Accessories WinCT in CD-ROM, Manual, AC Adapter
Serial Interface Standard RS232
* As supplied from the factory unless Verified and Verification required a change to factory setting
** Please note that this indicates if the unit can be verified within Australia only. This does not state that verification has been performed. Verification is a separate charge.
©ANYSCALES. All Rights Reserved.