A&D GH & GR Series - Analytical Semi-Micro Balance

A&D Analytical Balance

From $3,331.00

G HGR Series Analytical Balance

* Required Fields



    GR analytical balances feature an internal automatic calibration function as well as an RS232 data output and data logging as standard.

    Also has unique ergonomic door design.

    More Information
    • Five years warranty
    • Advanced, reliable, accurate weighing
    • Full digital calibration using internal motor driven masses
    • Two layer housing construction minimises the negative effects of ambient temperature changes
    • 11 weighing units plus counting & percentage
    • Range of capacities and resolutions
    • Built in underhook capability
    • Automatic self calibration on ambient temperature changes
    • One touch calibration with one press of the CAL key
    • Pull out quick reference card gives convenient operation instructions
    • Data memory to store up to 200 sets of weighing data
    • GLP compliant data output format to match quality systems
    • Sealed keypad protecting against spills and dust

    GR Series Analytical Balance

    GR-202 GR-300 GR-200 GR-210
    Weight capacity (g) 210  / 42  310 x 0.0001 210 120
    Division - Non Trade (g)  0.0001 /  0.00001 0.0001 0.0001 0.0001
    Environment Dry Environment
    Stablizing Time (typical at Fast) 3.5 / 8 sec (typically) 2.5 sec (typically)
    Repeatability (Standard Deviation) 0.0001 / 0.00002g 0.0002g 0.0001g
    Linearity ±0.0002 / ±0.00003g ±0.0003g ±0.0002g
    Internal Calibration YES
    Display LCD display
    Display update 5 times per second / 10 times per second
    Operating temp 5°C to 40°C, less than 85% RH (no condensation )
    Power supply AC adapter
    Weighing pan size Ø85mm
    Dimension 249 (W) x 330 (D) x 328 (H)
    Weight (approximately) 6kg
    Standard Accessories WinCT in CD-ROM, Manual, AC Adapter
    Serial Interface Standard RS232
    * As supplied from the factory unless Verified and Verification required a change to factory setting
    ** Please note that this indicates if the unit can be verified within Australia only. This does not state that verification has been performed. Verification is a separate charge.
    ©ANYSCALES. All Rights Reserved.